-12- © 2017 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
MS650 User’s Manual
2.1.4 USB VCP
Emulates a USB virtual com device that transmit each barcode data to the
host after decode. Barcode data is sent via USB cable directly.
Please scan the barcode below.
USB VCP
2.2 BT – HID
2.2.1 BT-HID Getting Connected
Step 1. Scan [Disconnect] to delete previous pairing record. Alternatively,
you may long-press the function button for 5 seconds until the
scanner emit two beeps.
Disconnect
Step 2. Scan [BT - HID]; the scanner will emit two beeps.
BT-HID
To Next Page
Loading...
Need help?
General
