-16- © 2017 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
MS650 User’s Manual
2.3.2 Numeric Barcodes
1 2 3 4 5
6 7 8 9 0
2.4 Batch Mode
2.4.1 Batch Mode, Delete Record
After scanning the above barcode, the scanner will be able to collect
barcodedata off-line. The barcode data will be stored in the format of:
< Date >, < Time >, < Barcode Data > < CR >
To retrieve stored data, please connect the scanner to the host with cable,
access removable storage device “MiniScan” from which you may open or
copy the file “BARCODE.txt” to your computer.
To exit Batch Mode, simply scan any other interface barcode in
INTERFACE section.
Batch Mode
To Next Page
Loading...
Need help?
General
