Unitech MS840 Series User Manual

Step 6: The cradle wall-mount installation is completed, as shown in the figure
below.
Cradle-less, Battery Charging (MS840B)
To charge the scanner without a cradle, follow the instructions below:
1. Plug the adapter cable into the power
socket of the foot of scanner.
2. Plug the AC adapter cord into an
electrical outlet.
Now, check whether the scanner LED
will be bright in solid red during
charging.
When the charging is done, the
scanner LED will turn off.
11

Unitech MS840 Series Specifications

General

Brand	Unitech
Model	MS840 Series
Category	Barcode Reader
Language	English