Dongle Mode, Connection (for MS840P ONLY)
Dongle Mode (with SCM support)
In order to establish a proper connection between your computer and a scanner
through a dongle, we suggest that you follow these step-by-step instructions:
1. Turn on your computer or laptop PC.
2. Insert a dongle into a USB port of the
computer or laptop PC.
3. Scan the MAC address of the dongle by
using the MS840B scanner.
4. When being successfully connected to
the dongle, the scanner will beep shortly
one time with a high tone.
You can also connect the MS840B scanner optionally to another dongle by
following the steps made below.
1. Scan the Disconnection
barcode.
14
To Next Page
Loading...
Need help?
General
