Unitech MS842 User Manual

Transmit UPC-E1 Check Digit
The check digit is the last character of the symbol used to verify the integrity of the
data. Scan the appropriate bar code below to transmit the bar code data with or
without the UPC-E1 check digit. It is always verified to guarantee the integrity of the
data.
UPC-E1 Preamble
Preamble characters are part of the UPC symbol, and include Country Code and
System Character. There are three options for transmitting a UPC-E1 preamble to
the host device: transmit System Character only, transmit System Character and
Country Code (“0” for USA), and transmit no preamble. Select the appropriate
option to match the host system.
EAN-13/JAN-13
Enable/Disable EAN-13/JAN-13
To enable or disable EAN-13/JAN-13, scan the appropriate bar code below.
48
Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

Unitech MS842 Specifications

General

Type	Handheld bar code reader
Sensor type	Laser
Scanner type	1D/2D
2D (matrix & stacked) barcodes supported	-
Connectivity technology	Wireless
Power source type	Battery
Buzzer	Yes
Product color	Black, Grey, Yellow

Weight and Dimensions

Weight	- g