Unitech MS842 User Manual

Bookland EAN
Enable/Disable Bookland EAN
To enable or disable Bookland EAN, scan the appropriate bar code below.
Note:
If Bookland EAN is enabled, select a Bookland ISBN Format. Also select either Decode
UPC/EAN Supplementals, Autodiscriminate UPC/EAN Supplementals, or Enable 978/979
Supplemental Mode in Decode UPC/EAN/JAN Supplementals.
Bookland ISBN Format
If Bookland EAN is enabled, select one of the following formats for Bookland data:
 Bookland ISBN-10 - The decoder reports Bookland data starting with 978 in
traditional 10-digit format with the special Bookland check digit for
backward-compatibility. Data starting with 979 is not considered Bookland in this
mode.
 Bookland ISBN-13 - The decoder reports Bookland data (starting with either
978 or 979) as EAN-13 in 13-digit format to meet the 2007 ISBN-13 protocol.
Decode UPC/EAN/JAN Supplementals
49
Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

Unitech MS842 Specifications

General

Type	Handheld bar code reader
Sensor type	Laser
Scanner type	1D/2D
2D (matrix & stacked) barcodes supported	-
Connectivity technology	Wireless
Power source type	Battery
Buzzer	Yes
Product color	Black, Grey, Yellow

Weight and Dimensions

Weight	- g