Unitech PA600BT Getting Started

Chapter 5 Advanced Settings
45
Performing a hardware reset
Perform a reset if the PA600 freezes (i.e., no longer responds).
A soft reset allows the PA600 to get a fresh start, similar to rebooting a computer. This
restarts the PA600 and adjusts memory allocation. All records and entries are retained
after a soft reset. However, unsaved data in open programs may be lost in some
cases.
Performing a Warm Boot
1. Remove the Stylus from its holder.
2. Lightly press the tip of the Stylus into the Reset Button on the PA600’s back
panel.
Reset Button

Unitech PA600BT Specifications

General

Brand	Unitech
Model	PA600BT
Category	PDA
Language	English