Unitech TS100 User Manual

- 57 -
© 2022 Unitech Electronics Co., Ltd. All rights reserved.
Unitech is a registered trademark of Unitech Electronics Co., Ltd.
All product and company names are trademarks, service marks, or registered trademarks of their respective owners
TS100 User’s Manual
3.23 Data Matrix
3.23.1 Enable/Disable Data Matrix
3.23.2 Set Length Range for Data Matrix
Barcode length can be set to the maximum value or minimum value. The value
between the maximum and the minimum is valid.
Data Matrix max length command: 023603. The parameter of this command can be
set from min to 3116.
Data Matrix min length command: 023602. The parameter of this command can be
set from 1 to max.
Example: Set the Barcode length of the minimum value 10 and the maximum
value 25:
1. Scan the Set the Maximum Length barcode.
2. Scan the numeric barcodes ”2” and ”5” in Appendix A .
3. Scan the Set the Minimum Length barcode.
4. Scan the numeric barcodes ”1” and ”0” in Appendix A .
Enable Data Matrix
Disable Data Matrix *
Set the Minimum Length
Set the Maximum Length

Unitech TS100 Specifications

General

Brand	Unitech
Model	TS100
Category	Scanner
Language	English