- 59 -
© 2022 Unitech Electronics Co., Ltd. All rights reserved.
Unitech is a registered trademark of Unitech Electronics Co., Ltd.
All product and company names are trademarks, service marks, or registered trademarks of their respective owners
3.25 Aztec Code
3.25.1 Enable/Disable Aztec Code
3.25.2 Set Length Range for Aztec Code
Barcode length can be set to the maximum value or minimum value. The value
between the maximum and the minimum is valid.
Aztec Code max length command: 023306. The parameter of this command can
be set from min to 3282.
Aztec Code min length command: 023305. The parameter of this command can
be set from 1 to max.
Example: Set the Barcode length of the minimum value 10, and the maximum
value 25:
1. Scan the Set the Maximum Length barcode.
2. Scan the numeric barcodes”2”and”5”in Appendix A .
3. Scan the Set the Minimum Length barcode.
4. Scan the numeric barcodes”1”and”0”in Appendix A .