Unitech UNI-335 User Manual

18
- Parking hours 0:30
0 is flashing
, - Adjusts parking hour (value
from 0 to 2).
- Parking
minutes
0:30
30 is flashing
, - Adjusts parking minute
(value from 0 to 59).
- Toggle Parking
countdown
+
or
- Enables parking countdown.
There is a beep 5 min. before the
Parking countdown reaches 0.
- Disables parking countdown.
2 Illumination Menu
Default is
- Toggle
Illumination
Mode
3 SEC. or
5 SEC. or
OFF
, Basic operation with backlight
Illumination 3 SEC. or 5 SEC.;
OFF – basic operation without
backlight Illumination.
3
Second Vehicle
Security Operation
Menu
Default is CAR 1
- Car Select CAR 1 or
CAR 2
-CAR 1 operation.
- CAR 2 operation.
4 Clock Menu
Default is
- Clock hours 12:00AM
12 is flashing
, - Adjusts clock hour from 0 to 12
- Clock minutes 12:00AM
00 is flashing
, - Adjusts clock minute from 0 to
59
5 Alarm Clock Menu Default is
- Alarm hours 12:00AM
12 is flashing
, - Adjusts alarm clock hour from
0 to 12
- Alarm minutes 12:00AM
00 is flashing
, - Adjusts alarm clock minute
from 0 to 59
- Toggle alarm ON + or
OFF
-Enable alarm clock or
-Disable alarm clock

Unitech UNI-335 Specifications

General

Brand	Unitech
Model	UNI-335
Category	Controller
Language	English

Summary

BATTERY REPLACEMENT

REMOTE TRANSMITTER OPERATION

CHIRP INDICATORS

ACTIVE ARMING – LOCK & ARM

PASSIVE ARMING (Programmable)

ACTIVE DISARMING – UNLOCK & DISARM

DISARMING WITHOUT A TRANSMITTER

OVERRIDES THE ALARM WITHOUT PASSWORD PIN CODE

Procedure for disarming the alarm using the valet switch when the transmitter is lost.

OVERRIDE THE ALARM WITH PASSWORD PIN CODE

Method to program and use a password PIN code for alarm override.

VALET MODE:

Get into/out valet mode using the ignition key.

PANIC FUNCTION:

TRIGGER THE SYSTEM

ANTI CAR-JACKING (Programmable)

ACTIVE ANTI CAR JACKING:

Details the procedure for activating the active anti car-jacking mode.

PASSIVE ANTI CAR-JACKING:(Programmable)

Explains how the passive anti car-jacking feature operates.

TRIGGERING THE ANTI CAR -JACKING MODE:

SYSTEM'S TRIGGER CHECK (For two-way transceiver operation only)

SYSTEM'S STATUS CHECK (For two-way transceiver operation only)

IGNITION CONTROL DOOR LOCK/UNLOCK. (Programmable Feature)

TRUNK RELEASE (CHANNEL 3) OUTPUT.

CHANNEL 4 TIMER CONTROL OUTPUT.

SECOND VEHICLE SECURITY OPERATION:

REMOTE START OPERATION:

A. TO REMOTE START THE VEHICLE:

Step-by-step guide on how to remotely start the vehicle using the transmitter.

SAFE START (Child safety mode)

OPERATE THE VEHICLE WHILE RUNNING FROM THE REMOTE START:

TEMPORARY STOP FEATURE:

TURBO CHARGE MODE:

TIMER START:

Daily Timer Start:

A 3 Hours Timer Start:

B: Daily Timer Start:

TO TURN OFF THE REMOTE START:

SHUT-DOWN INPUT FOR REMOTE STARTER:

DISABLING THE REMOTE START SYSTEM: (If installed)

ADVANCED USER'S MODE:

C. LCD REMOTE CONTROL TRANSCEIVER OPERATION:

PROGRAMMING LCD REMOTE:

Selecting and Adjusting Menu options: