1110
Make sure the uDirect 2 is charged and
switched ON.
Make sure you are not on a phone call
connected through the uDirect 2.
Streaming music via a cable
The uDirect 2 must be switched ON and worn
correctly around your neck.
1. Insert the audio cable into the headphones
socket on your audio player and start the
player.
2. Insert the other end of the audio cable into
the audio input on your uDirect 2. The audio
streaming is
automatically
activated and the
audio indicator
will change to
orange.
Testing sound via the uDirect 2
1. Wear the uDirect 2 correctly and switch it ON.
2. Press and hold the connect
(
) and access ( ) buttons
simultaneously for 2 seconds until
the audio indicator turns violet.
The hearing aids will switch to the
streaming mode and you will hear the uDirect 2
sound demo for 30 seconds after the last volume
adjustment.
Use the volume (
) buttons to adjust the
volume.
The sound demo will stop 30 seconds after the last
volume adjustment or by pressing any other key.
If you cannot hear the sound demo:
Make sure your hearing aids are inserted
correctly.
Make sure the uDirect 2 neckloop is properly
plugged in on both ends and worn around
your neck.
To Next Page
Loading...
Need help?
General
