17
uDirect will remain in the pairing mode for two
minutes or until the pairing is complete.
5. On the PC, choose to find and add a specific
Bluetooth device.
6. Of the devices found, choose uDirect.
7. When the PC prompts for a passcode or PIN, enter
“0000” (four zeros).
8. Allow devices to complete the establishment of a
trusted link.
9. If prompted on the PC to choose Bluetooth
services, you may have several options available.
Select the "Stereo Headset" functionality to stream
audio in stereo. After choosing which services you
wish to enable, you can finish the connection and
exit the setup on the PC.
Confirmation of successful connection is indicated on
uDirect by the Bluetooth indicator slowly flashing
blue.
For further information please refer to the user guide
provided with the PC or external Bluetooth adapter.
Deleting Bluetooth pairings
If you wish to delete the pairing relationships between
your uDirect and other devices, press and hold the
Bluetooth pairing button for about 10 seconds until
the Bluetooth indicator is lit solid blue.
To Next Page
Loading...
Need help?
General
