21
mobile phone to the hearing instruments is
established.
For your safety, the hearing instruments’ microphones
will remain ON at reduced level during phone calls.
Rejecting incoming calls
If you prefer not to answer a call, press and hold the
communication button on your uDirect for about two
seconds until the Bluetooth indicator turns OFF. Your
uDirect will command your mobile phone to reject the
call and send a busy signal.
Rejecting the call by operating your mobile phone
directly will have the same effect.
Making a call
Initiating a phone call is not any different with or
without uDirect: Simply use the mobile phone
keyboard to enters or select a number and dial.
If connected, you will hear the ringing indication in
your hearing instruments and they will activate the
dedicated Bluetooth phone program.
Once the connection is established, no further
manipulation of the phone is required.
Speak into uDirect – not into the mobile phone – when
the called party answers.
To Next Page
Loading...
Need help?
General
