Universal Robots UR5 Service Manual

• Inset wire bundle as shown on photo,
with the cable tie towards the flange.
• Mount the grommet into the flex plate
with the tweezers or the small flat nose
screwdriver.
• Hold the heat shrink with tweezers while
sliding down the grommet.
UR5 46 Service Manual
5.Service and Replacement of parts
Copyright © 2009–2021 by UniversalRobotsA/S. All rights reserved.

Universal Robots UR5 Specifications

General

Brand	Universal Robots
Model	UR5
Category	Robotics
Language	English