Universal Robots UR5 Service Manual

3. Remove the 5 torx screws and followed by the aluminum cover.
4. Carefully remove all plugs and connectors from the Safety Control Board.
5. Remove the 14 screws holding the board in place.
6. Replace Safety Control Board with new one and tighten the 14 screws to fasten the board
in place.
7. Insert all connectors and plugs back into their correct positions.
UR5 66 Service Manual
5.Service and Replacement of parts
Copyright © 2009–2021 by UniversalRobotsA/S. All rights reserved.

Universal Robots UR5 Specifications

General

Brand	Universal Robots
Model	UR5
Category	Robotics
Language	English