BREAKDOWN CAUSE SOLUTION
The supply mains voltage is
missing
Restore the voltage
Intervention of one of the fuses on
the power board
Apply to a qualified UNOX
technician for service
The oven is completely turned off
The electrical connection to the
mains has not been made in the
correct way
Check the connection of the
appliance to the mains
The water inlet valve is closed Open the water inlet valve
The connection to the water
supply or to the tank has not been
made in the correct way
Check the connection to the
water supply or to the tank
The tank is empty (in case the
appliance is connected to an
external tank)
Pour water in the tank
The humidity control of the oven
is on, but the water does not
come out of the pipes
The filter on the water inlet is
blocked
Clean the filter
The door of the oven is open or
not properly closed
Close the door in the correct way
The oven does not start even
though you have set the time or
the core temperature and pressed
START / STOP button
Damaged door magnetic micro
switch
Apply to a UNOX qualified
technician for service
Damaged door seal
Apply to a UNOX qualified
technician for service
There is water coming out though
the door and the sealing even
though the door is closed
Loose door mechanism
Apply to a UNOX qualified
technician for service
Blown lamp Replace the lamp
The oven light does not turn on
Loose lamp
Place correctly the lamp in the
lamp holder
The fans do not reverse their
rotation
Apply to a UNOX qualified
technician for service
One of the fans is not rotating (in
case of oven with more than one
motor)
Apply to a UNOX qualified
technician for service
The cooking is not even
One of the heating elements is
broken
Apply to a UNOX qualified
technician for service
To Next Page
Loading...
Need help?
General