10
TORQUE SPECIFICATIONS
Metric US Equivalent Location on Bike
54 to 61 Nm 40 ft/lb to 45 ft/lb cylinder heads
237 to 251 Nm 175 ft/lb to 185 ft/lb fly wheel tightening screws
19 to 30 Nm top 14 ft/lb to 22 ft/lb shock absorber
38 to 49 Nm bottom 28 ft/lb to 36 ft/lb shock absorber
30 to 35 Nm 22 ft/lb to 26 ft/lb bearing nut
30 to 35 Nm 22 ft/lb to 26 ft/lb final drive to swing arm bolts
8 to 10 Nm 5.8 ft/lb to 7.2 ft/lb oil pump bolt
8 to 10 Nm 5.8 ft/lb to 7.2 ft/lb engine sump
14 to 19 Nm 10 ft/lb to 14 ft/lb final drive case nuts
68 to 90 Nm 50 ft/lb to 66 ft/lb nut fastening the pinion bearing
22 to 27 Nm 16 ft/lb to 20 ft/lb reverse gear brake lever
19 to 22 Nm 14 ft/lb to 16 ft/lb alternator gear nut
136 to 163 Nm 100 ft/lb to 120 ft/lb steering stem nut
CONVERSIONS
To convert from mm to in, divide by 25.4 (there are 25.4 mm per inch).
To convert from liters to gallons, divide by 3.785 (there are 3.78 liters per gallon).
To convert from liters to quarts, multiply by 1.056 (there are 1.056 quarts per liter).
To convert from liters to pints, multiply by 2.112 (there are 2.112 pints per liter).
To convert from km to miles, multiply by .62 (there is .62 mile per km).
To convert from km/hr to mph, multiply by .62.
To convert from Newton-meter (Nm) to inch-pound, multiply by 8.86.
To convert from Newton-meter (Nm) to foot-pound, multiply by .7376.
To convert from cm
3
(cc) to pints, divide by 473 (there are 473 cc per pint).
To convert Celcius to Fahrenheit: F° = C° x 1.8 + 32.
To convert Fahrenheit to Celcius, C° = (F° − 32) divide by 1.8.
To Next Page
Loading...
Need help?
General
