33
Chapter 7
RUNNING GEAR
SPRING LOADED HYDRAULIC SHOCK ABSORBER
The suspension features cam-type adjusters used for varying the pretension of the supporting
springs to suit the load and the road condition. The degree of tension of the springs is adjustable
allowing two positions. The first (lower) position corresponds to the load due to the motorcycle’s
own weight and the driver’s. the second (upper) position of moving cam corresponds to the maxi-
mum load.
Care of shock absorbers. Fill the shock absorber with 105 cm³ of hydraulic fluid. Each time
during maintenance, check the bolts fixing the top and bottom ends of the shock absorbers for
tightness.
To Next Page
Loading...
Need help?
General
