USR IOT USR-W630 User Manual

USR-W630 User Manual Technical Support: h.usriot.com
Jinan USR IOT Technology Limited www.usriot.com
15
3.6. Wireless Bridging Application(AP+STA)
Figure 12 wireless bridging application
USR-W630 work as AP+STA, the SSID and encryption, encryption algorithm (the "wireless access point settings"
section of the Web page) of AP set to the same parameters as STA (the "wireless terminal settings" in the Web page),
and STA to connect to the router (the IP of AP in the same network segment with router). In this way, the wireless
dual-port serial port server is equivalent to a wireless switch bridging to the router, which expands the wireless
coverage of the router.
Table 5 AT commands
No.
Command
Intro
1
AT+FAPSTA=on
Enable AT+STA mode, the command is restored to the
factory settings valid.
2
AT+FVER=z
Enable Z mode, the command is restored to the factory
settings valid.
3
AT+WMODE=STA
Set W630 work at STA mode
4
AT+WSSSID
Set the SSID of router which W630 join
5
AT+WSKEY
Set the password of router which W630 join
6
AT+WAP
Set the SSID of router
7
AT+WAKEY
Set the password of router
8
AT+LANN
Set the IP of W630 in the same network segment with
router
9
AT+DHCPDEN=off
Unable the DHCP function of W630

USR IOT USR-W630 Specifications

General

Brand	USR IOT
Model	USR-W630
Category	Media Converter
Language	English