USR IOT USR-W630 User Manual

USR-W630 User Manual Technical Support: h.usriot.com
Jinan USR IOT Technology Limited www.usriot.com
29
5.1.3. Other Page
Mode selection: mainly sets up the WIFI working mode and data transmission mode of W630. WIFI mode includes "AP
mode" and "STA mode"; "Data transfer mode" includes "transparent transfer mode", "serial instruction mode" and
"HTTPD Client mode".
Wireless access point settings: this webpage mainly sets up the parameters of W630 AP mode. Including: SSID settings,
wireless network mode settings and wireless security settings, as well as the AP composition of the LAN settings.
Wireless Terminal Settings: This web page sets the WIFI parameters of STA mode, including router SSID, wireless
security and STA network IP access (DHCP or static IP), USR-W630 supports three sets of STA parameters for user
settings.
Serial port and network settings: this webpage is mainly set up serial port parameters and Socket parameters of W630.
Including serial port parameters, serial port framing mode, registration package mechanism, Socket A parameters and
Socket B parameters.
Ethernet function settings: This web page is mainly set up W630 network interface switch and working mode, this
network interface can be used as LAN port, also can be used as WAN port (this function does not need to be set).
HTTPD Client mode: This page sets HTTPD Client mode, HTTP protocol header content, including: server address,
server port, request type, protocol header path, protocol header Connection, protocol header User-Agent. HTTPD
Client mode supports POST, PUT and GET three HTTP requests.
Module management page: Module management includes user name / password settings, restart, restore factory
settings and software upgrades.
5.2. AT Command Setting
5.2.1. Serial Port AT Commands
Users can set up the WIFI serial port server by using AT command through UART port.
5.2.2. Net AT Commands
After searching for W630 through LAN search, use AT command to query and set W630 parameters.
5.3. AT Commands
Table 8 AT commands
Command
Function
(None)
Empty command
E
Open/close instruction recall
ENTM
Exit command mode
NETP
Query/setup the parameter of net protocol
UART
Query/setup the parameter of serial port
UARTF
Open/close auto framing function
UARTFT
Set / query auto framing trigger time

USR IOT USR-W630 Specifications

General

Brand	USR IOT
Model	USR-W630
Category	Media Converter
Language	English