USR-W630 User Manual Technical Support: h.usriot.com
Jinan USR IOT Technology Limited www.usriot.com
Set / query auto framing trigger length
Set / query data transfer mode (transparent transport mode or protocol
mode)
Set / query encryption parameters in WIFI STA mode
Set / query AP SSID in WIFI STA mode
Query link status in wireless STA mode
Set / query landing parameters for WEB pages
Setting / querying parameters in WIFI AP mode
Set / query encryption parameters in WIFI AP mode
Set the module into low power mode, close WIFI
Query whether the TCPA connection has been established.
Link / disconnect TCP (valid only at TCP Client)
Setting / querying WAN settings is valid only in STA mode.
Setting / querying LAN settings is valid only in AP mode.
Set / query TCP timeout time
Set / query maximum TCP connection number
Enabling / disabling TCPB functions
Set / query the port number of TCPB
Set / query the server address of TCPB
Set / query TCPB timeout time
Query whether the TCPB connection has been established.
Turn on / off ETH interface
Turn on / off for the first time to establish the ID function of the
connection belt.
Turn on / off each data with ID function
Turn on / off adaptive baud rate function
Turn on / off the DHCP Server function of LAN port.
Set up / query to hide the SSID of module AP
Set / query the domain name of the landing module page.
Enabling or prohibiting AP+STA functions
Set / query the threshold value of signal switching for three sets of
STA parameters.
New and old version of HTTP header setup mode switch (HTTPD
Client)
The old version sets / inquires the IP and port of the HTTP server
To Next Page
Loading...
Need help?
General
