Val Controls A/S • Limfjordsvej 3 • DK-6715 Esbjerg N • Tel. +45 7547 0600
vc@valcontrols.com • www.valcontrols.com
4.3 Buttons - menus
Four menus can be accessed from the main screen by pressing each of the buttons or using
MTControl.
The F model only has one button. Pressing it for 3 seconds will initiate the auto calibration. The
tests and auto calibration can be aborted by pressing the button for one second.
4.3.1 Test menu
Start a partial stroke test
View the reference and latest partial stroke test values and limits
Date the test was performed
Time the test was performed
Result of the latest test
View the reference and latest full stroke test values and limits
Date the test was performed
Time the test was performed
Result of the latest test
Breakaway position error limit
View the reference and latest solenoid valve test values and limits
Date the test was performed
Time the test was performed
To Next Page
Loading...
Need help?
General
