Vatech EzSensor Classic User Manual

8
2.2 Product Components
The EzSensor Classic device installer should check the following items listed in the table
below before Productinstallation. If the serial numbers of the individual parts do not match, do
not install the Product. Contact your local distributor or agent for support.
This Product should be connected with a device or product which is complied with IEC 60601-1.
<Table 2. EzSensor Classic Product components>
No Components Remarks
1 Sensor Module* 2.7m USB cable is all in one
2 Wrap* (Hygienic Sleeves)
3 Holder for Sensor
4 Silicon cover*
5 S/W Installation CD(or USB)
EasyDent (or EzDent-i)
6 Driver Installation CD USB Device Driver
7
EzSensor Classic Manual
Document
* Patient applied part (Inside Patient environment)
Sensor Module:
Consists of a special CMOS sensor specifically designed for use in radiography and
enclosed in a hermetically sealed ergonomic capsule. The sensitive surface of the
sensor is covered with a thin layer of scintillating phosphorous, through which X-ray
radiation is converted into light and then into an electric charge.

Vatech EzSensor Classic Specifications

General

Brand	Vatech
Model	EzSensor Classic
Category	Medical Equipment
Language	English