Vatech EzSensor Classic User Manual

12
3.2.2 Cable connection & Driver Installation
Step 1
Connect the EzSensor
Classic USB Connector to the
USB port on the PC directly.
Be sure to connect the USB
port on backside for
accurate operation.
Do not connect the EzSensor Classic and USB PC Interface cable to your
computer until you have successfully installed the setup program.
Only connect the item that has been specified as part of the Medical
Equipment System.

Vatech EzSensor Classic Specifications

General

Brand	Vatech
Model	EzSensor Classic
Category	Medical Equipment
Language	English