Vax Steam Clean Multi S85-CM User Manual

Push the main body down into the
oorhead until it clicks into place.
Stand the steamer upright by pushing the
main body forward to lock into position.
Push the handle into main body until it
clicks into place. The collar should be gripped
when connecting or releasing the handle.
Assembling your steamer
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
Before you Begin
WARNING
• The steamer and accessories get very hot during use, always allow them to cool down before handling.
• Always unplug and switch o the steamer when assembling or disassembling.
• Always switch o the steamer before emptying the water tank or changing the cloths/accessories.
IMPORTANT
• Please refer to oor manufacturer’s care recommendations before use and test the steamer on a hidden area of ooring
to begin with.
• Test for colour fastness in a small hidden area of upholstery/fabric to check for colour removal before use.
• When using the steamer, basic safety precautions should always be observed.
• Don’t aim the steamer at people, animals, plants and electrical components or wires. Never touch the steam jet or oorhead
from a short distance (there is a risk of scalding).
• The steamer is equipped with a thermostat and a thermal cut-out. If for any reason the steamer overheats it will switch o.
If this happens turn o and unplug the steamer, allow to cool for at least 2 to 4 hours and re-try.
• Don’t use hot or boiling water to ll or clean water tank
Getting started

Vax Steam Clean Multi S85-CM Specifications

General

Brand	Vax
Model	Steam Clean Multi S85-CM
Category	Steam Cleaner
Language	English