Installation Manual –Page 3 / 13
1. Introduction
1.1. General information
Thank you for purchasing a Climma CWS system!
This manual will provide necessary information for the proper installation, operation, and
maintenance of your Climma system.
Climma products are designed and produced to the highest standards and they are all tested in the
factory. If your Climma system is used according to the guidelines in this manual, it will guarantee
you trouble free operation for many years.
If you require assistance, please contact one of our many authorized service centers. To find the
service center please check our website www.veco.net or write us at customerservice@veco.net.
1.2. System features
The new Climma C-TOUCH thermostats has been designed to be easy to use and simple, to get the
best out of your climate control.
• Weekly scheduler
• Customizable interfaces and colors
• Easy interface
• Designed for the most used cover plates
• Lcd display 2,4’ (320x240 px)
C-TOUCH is compatible with Climma self-contain Compact units (serie Mk3 and EF, with MK3
electronic control) and with Climma fancoils (with Mv8 electronic control and MCON electronic
control).
C-TOUCH can fully replace Mk3 controls and Mk2 controls, considering that the Mk3 and Mk2
controls needs a 4 position cutout, while C-Touch only a 3 position. While replacing the control,
make sure to order the adjusting kit from 4 to 3 positions.
C-Touch display is also compatible with the following cover plates:
The unit has to be installed by an authorized Climma service center and in compliance with the
instructions given in this manual. A bad installation or a misunderstanding of the display
functioning may result in possible problems and wrong functioning of the system.
Brand Serie Veco Code Plaque code Cut on support
BTICINO LIVINGLIGHT
MPACT001 LNA4803**, LNB4803**, L4803** Yes
MPACT001 HA4803** / HB4803** Yes
VIMAR ARKE' MPACT001 Arkè 3 position plaque
VIMAR EIKON EVO MPACT001 Eikon 3 position plaque (BS type excluded)
VIMAR EIKON EXE' MPACT001 Eikon 3 position plaque (BS type excluded)
VIMAR PLANA MPACT001 Plana 3 position plaque
BTICINO AIR (LIVINGLIGHT AIR)
BTICINO AIR (AXOLUTE AIR) MPACT201 HW4803**
MPACT301 167*3 (vimar Idea 3 modules) No