Vector X2 User Manual

X2-OPERATIONS MANUAL BUTTON DISPLAY
Doc: 70-00-0950A, Serie X2, 20211220 © Vector Controls GmbH, Schweiz Page 5-16
Subjects to alteration www.vectorcontrols.com
VECTOR
2.7 Error messages
If an Error is active, the alarm symbol is set and the Error messages are shown on the small digits.
Some errors can be confirmed by pressing the "Right" button.
Small Digits
Error condition
Err1
Communication error between operating terminal and controller
Err2
Internal error: Firmware version of the memory does not match firmware.
Err3
Internal error
Err4
Configuration error: An assigned input is not activated or has failed. Check all settings and ensure
that all inputs used are activated and functional.
Err5
Copy error: Communication error with external memory AEC-PM1 or AEC-PM2. The plug-in module is
either damaged or missing.
Err6
Copy error: Checksums of the data record are incorrect. The data record is invalid.
Sample display:
2.8 Status LED
Most devices have a status LED. The position of the status LED is defined in the product data sheet.
In normal operation, the LED flashes briefly once every 5 seconds.
In an alarm or error condition, the LED flashes every second.

Vector X2 Specifications

General

Brand	Vector
Model	X2
Category	Controller
Language	English