Veeder-Root EMR4 User Manual

Setup Mode Setup Mode Categories
15
TAX/DISCOUNT
Figure 10 illustrates Tax/Discount setup in Setup Mode.
The Subtotal feature allows you to define and insert additional subtotal lines in the same manner as the existing tax
or discount lines. Adding this feature creates a type called subtotal (T/D/S). Type subtotal is a selection in the
CHNG T/D VALUE menu that has no user defined value, but does have the ASSIGN TO LINE selection. Using
the T/D SUBTOTAL feature allows for an ‘intermediate subtotal’ that includes Taxes and/or Discounts. Once the T/
D SUBTOTAL selection is made, you can now assign which T/D LINES to assign to it. Only those lines assigned
to the T/D SUBTOTAL are summed together. Using the T/D SUBTOTAL feature creates an additional line to print
on the delivery ticket and is now part of the delivery record. The T/D SUBTOTAL has a printer label associated with
it that can be modified for use on an ‘invoice’ with a user-defined label.
To assign lines to subtotal, go to TAX/DISCOUNT menu, press NEXT to get T/D/S CODEn, press NEXT to get T/
D/LINEn, press NEXT to get CHNG T/D VALUE, press NEXT to get TAXPERCENT, then using +/- buttons, go to
T/D SUBTOTAL, then press NEXT to get CHNG T/D ASSGN, then press NEXT to get ASSGN TO LINE, then
assign lines for subtotal using +/-, NEXT and ENTER buttons.
Figure 10. Tax/Discount SetupDefaults
TAX/DISCOUNT
-
+
T/D/S CODE 1
T/D/S CODE 15
IMPORTANT!
Only TAX PERCENT, DIS PERCENT and T/D SUBTOTAL values can access
the ASSIGN TO LINE feature. You must select at least one ASSIGN TO LINE
choice for TAX PERCENT, DIS PERCENT and/or T/D SUBTOTAL or they will
not be implemented. Depending on their initial T/D/S Line value chosen above,
any one can also be assigned to other T/D/S Lines as follows:
(Note: Line 0 is the delivery's SUBTOTAL [volume times base price].)
Initial T/D/S Permissible additional
Line Value T/D/S Line Assignments
1 0
2 0, and/or 1
3 0,1, and/or 2
4 0,1,2, and/or 3
5 0,1,2,3, and/or 4
6 0, 1, 2, 3, 4, and/or 5
Note: DIS PERCENT
is a percentage.
DIS PER VOLUME
and DIS SURCHARGE
are currency units.
Enter Dis % as a percent
(e.g., 6 not 0.06)
Note: UNUSED is the default T/D/S Value setting.
Note: The order in which the T/D/S Value selections
are implemented begins with T/D/S Line 1 Value
and ends with T/D/S Line 6 Value.
Note: TAX PERCENT
is a percentage.
TAX PER VOLUME
and TAX SURCHARGE
are currency units.
Enter tax % as a percent
(e.g., 6 not 0.06)
T/D/S LINE 1
T/D/S LINE 6
CHNG T/D/S VALUE
CHNG T/D/S ASSGN
CHNG T/D/S VALUE
CHNG T/D/S ASSGN
-
+
-
+
-
+
-
+
-
+
TAX PERCENT
TAX PER VOLUME
SURCHARGE
DIS PERCENT
DIS PER VOLUME
DIS SURCHARGE
T/D SUBTOTAL
UNUSED
ENTER NEW TAX
ENTER NEW DIS
ASSIGN TO LINE
Press up/down to
change digit and
NEXT to move to
next digit.
Press up/down to
change digit and
NEXT to move to
next digit.
DEFAULTS
RELAY CONTROL
SECURITY
PRINTER OPTION
VIEW RECORDS
RESTORE RECORD
SHIFT
DATE FORMAT
TIME/DATE
SYSTEM ADDRESS
TIME DELAYS
VERSION NUMBER
C AND C
ENTER SECURITY CODE
PRICING
Press the up/down
buttons to cycle
through remaining
Setup Mode categories
ASSIGN TO LINE

Veeder-Root EMR4 Specifications

General

Brand	Veeder-Root
Model	EMR4
Category	Measuring Instruments
Language	English