Veeder-Root EMR4 User Manual

C&C Mode C&C Mode Setup Categories
48
DELIVERY OPTIONS
Figure 47 illustrates Delivery Options setup in C&C Mode. This option lets you enable or disable price changing
within the Delivery State as per your regulatory requirements. In this setup you also select coefficient (of
expansion) or density as the temperature compensation method for deliveries, enable delivery timeout, enable Tank
ID, enable Custom fields, enable Tank Load and enable E04 encoder error (Gross volume and Temperature on
Ticket fields also visible when temperature probe connected to EMR Head). Also you can enable / disable Gross
Preset, Gross Viewable, Multicalibrate 0.25% Diff and Multiple Delivery.
Figure 47. Delivery Options
REPORT FORMATS
RESTA RT
SECURITY CODE
LANGUAGE
DISPLAY SYNTAX
TEMPERATURE
METER CALIBRTN
CONFIGURE I/O
OEM MESSAGE
CUSTOM FIELD 1
CUSTOM FIELD 7
ENABLE
DISABLE
Press the up/down
buttons to cycle
through remaining
C/C Mode categories
COEFFICIENT
DENSITY
DISABLE
TANK ID
4
PIN ACCESS CTRL
5
+
-
+
-
SET
SECONDS
STANDARD
AUTOMATIC
PRE-FLOW TIMEOUT
POST-FLOW TIMEOUT
If Price Changing is Enabled, and the Delivery
Price option in Security setup is set to Yes, the
user can select from the Price Code list and
change price prior to pressing START, and after
pressing START prior to pressing FINISH.
If Price Changing is Disabled, and the Delivery
Price option in Security setup is set to Yes, the
user can still select from the Price Code list and
change price prior to pressing START.
If Price Changing is Enabled or Disabled, and
the Delivery Price option in Security setup is set
to NO for users 2 and 3, users 2 and 3 can only
select prices from the Price Code list prior to
pressing START.
These choices only appear when a temperature
probe is connected to the Display Head.
If you select Multiple Deliveries, the Custom
Fields are not available on the Summary Ticket.
The Tank ID selection will require the operator
enter the default Tank ID (e.g., Tank 1) or custom
Tank ID you enter under Setup Labels in Figure
33 prior to a delivery.
The Pin Access Ctrl selection will require the
operator to enter the PIN Access Control
number you entered with an OBC serial
command prior to a delivery.
2
4
5
3
1
1
Pre-Flow default: 1200 sec.
Post-Flow default: 180 sec.
PRICE CHANGING
TANK LOAD
GROSS VOLUME
TEMPERATURE ON TICKET
GROSS PRESET
GROSS VIEWABLE
MULTICALIBRATE 0.25% DIFF
E04 ENCODER PULSE ERROR
TEMP COMPENSATION
MULTIPLE DELIVERY
DELIVERY TIMEOUT
TANK ID/PIN CTRL
CUSTOM FIELDS
2
2
3
+
+
+
ENABLE
DISABLE
+
ENABLE
DISABLE
+
ENABLE
DISABLE
+
+
+
+
+
ENABLE
DISABLE
+
PRICE CHANGING
TEMP COMPENSATION
DELIVERY TIMEOUT
TANK ID/PIN CTRL
CUSTOM FIELDS
E04 ENCODER PULSE ERROR
GROSS VOLUME
TEMPERATURE ON TICKET
TANK LOAD
GROSS PRESET
GROSS VIEWABLE
MULTICALIBRATE 0.25% DIFF
MULTIPLE DELIVERY
The actual EMR4 Delivery Option
sequence is shown at right. The
sequence shown in the diagram
above has been rearranged to
avoid criss-crossing paths in the
diagram.
or
See Notice Below
DELIVERY OPTIONS

Veeder-Root EMR4 Specifications

General

Brand	Veeder-Root
Model	EMR4
Category	Measuring Instruments
Language	English