PMC Alarm Diagnostics for ISD/PMC and PMC Only Configurations MISSING VP INPUT
28
MISSING VP INPUT
An external input for the OPW and ARID vapor processor cannot be found.
ISD MONITORING CATEGORY
System Self-Test Monitoring algorithms are designed to ensure the proper setup and operation of the ISD monitor.
Among other items, the self-test algorithms will check for a properly configured TLS Console monitor as well as the
correct number of functioning sensors and interface modules.
System Self-Test Monitoring algorithms are broken down into two types of tests:
1. ISD sensor out self-test, designed to monitor for properly functioning sensors.
2. Setup self-test, designed to verify the monitor configuration.
DIAGNOSTIC PROCEDURE
• This warning only applies to EVR systems with an OPW or ARID vapor processor.
• Ensure the input line is properly configured and installed for the processor.
• Once all the causes are removed, enter and exit the Setup Menu using the MODE key, then press the red
ALARM button on the TLS and the condition should clear.
FIELD NOTES
This warning will not appear on a Healy EVR system.
To Next Page
Loading...
Need help?
General
