Vendo V-MAX Series User Manual

3/2002
G-7
LOADING INSTRUCTIONS
BASIC LOAD SET-UP:
The V-Max machine is capable of vending a variety of products. For specific
information, refer to the product set-up label on the machine inner door or contact
the Technical Services Department of the Vendo office in your area.
Load product evenly. Bottles are loaded with crown end placed toward the back of
the column. In initial loading, prime the machine by advancing the product into the
buckets. To advance product into buckets, use the vend test function of the
electronic controller. When the bucket is loaded, the column is ready to vend.
PRIME ALL COLUMNS DURING INITIAL PRODUCT LOADING

Vendo V-MAX Series Specifications

General

Brand	Vendo
Model	V-MAX Series
Category	Controller
Language	English