Vertiv NetSure 8200 Series User Manual

Vertiv | NetSure™ 8200 Series -48 VDC Power System User Manual (UM582140000) | Rev. A
24
Inventory Screen
Refer to Figure 12 for a sample of the inventory screen in this special NCU configuration.
The major differences here are that the distribution bus modules located in each distribution bay is named “Bay
# Top or Bottom Dist”. The # is the bay number in the bay line-up. The distribution bus modules in each
distribution bay monitors the bay’s load shunts; so any alarm, setting, etc. displayed by the NCU for these
shunts references the “Bay # Top or Bottom Dist” naming convention.
Figure 12: Inventory Screen
DC View Screen
When you click on the DC icon in the homepage, the DC view screen appears. A tab is provided in the DC view
screen (SMDUP) to allow viewing the load value of each distribution point in the system. See Figure 13.

Vertiv NetSure 8200 Series Specifications

General

Brand	Vertiv
Model	NetSure 8200 Series
Category	Power Supply
Language	English