Viotek NFI29CB User Manual

14
4. Push the Rocker button UP to set the GAME TIME.
Auto SelectDPHDMI1HDMI2
GAME TIME
GAME CURSOR
10:00 20:00 30:00 40:00
50:00 60:00 90:00
Section 10: Troubleshooting
The screen is blank
• Press the power button to turn on the monitor.
• Conrm the brightness and contrast settings are set normally.
• Check if the indicator light is ashing. If so, this indicates there is no signal from
your video source.
• If your source is a notebook or laptop, be sure that its settings are in mirror or
extension mode and the device itself is powered on.
The image is out of focus
• Ensure the video cable is inserted properly at both ends.
The screen is flashing
• Try an alternative power source. Insufcient current can be causing this issue.
• Ensure devices such as non-shielded speakers, uorescent lighting, AC
transformers, table fans, etc., are a safe distance away from your screen to avoid
magnetic disturbances.
The color bleeds or visual effects appear unusual.
• If your screen is all red or blue, or any colors disappear, check to see that the
cable is properly inserted. A loose connection can cause a bad signal.
• Try connecting to another video source for comparison.
The screen appears to be scrolling, rolling, or moving unusually.
• Check that your source frequency is within 75Hz.
• Reconnect and ensure your video cable is secure.
The indicator light does not work
• Check that the power is on.
• Check that the power line connected with power.
Cannot plug and play.
• Ensure the monitor is compatible with PC.
• Ensure the graphics card is compatible with the monitor.
• Check that the pins in the interface are not curved.

Viotek NFI29CB Specifications

General

Model Number	NFI29CB
LED Indicator	Power on: Blue (solid); Power saving: Blue (flashing)
Screen Size	29’’
Display Type	ADS
Viewing Angle	H178° / V178°
Aspect Ratio	21:9
Resolution	2560 x 1080p
Backlight	E-LED
Typical Brightness	300 cd/m² (max.)
Default Color Temp.	7500
Color Gamut	119%~123% sRGB; 85%~88% NTSC；90%~91% Adobe RGB
Contrast Ratio	1000:1 (Static)
Pixel pitch	0.2628 × 0.2628 (H x V)
Response Time	7ms (5ms OD)
Refresh Rate	75Hz (max.)
Ports	1x DP, 2x HDMI 1.4, 1x Audio Out (3.5mm)
Power	12V / 4A
Power Consumption	Max: 48W; Standby <=0.5W
OSD Language	English, 中文, 한국어, Deutsch, Español, Italiano, Français
Usage Temp.	32°F~95°F (operating), -4°F~140°F (storage), 10-90% RH (non-condensing)

Weight and Dimensions

Tilt Angle	Forward 5°; Backward 15°
VESA Mounting	75 x 75 mm
Dimension (with stand)	227.02 x 16.76 x 6.7 in (686.4 x 425.7 x 170.1mm)
Weight	8.16 Ib. / 11.68 Ib. (incl. packaging)