Viotek NFI29CB User Manual

15
Dim image
• Adjust the brightness and contrast ratio.
Image jitter/moire pattern
• Nearby electric equipment may interfere with the monitor.
Light indicator is on or flashing, but there is no image displayed on screen
• Check that the monitor power is on.
• Check that the graphics card is installed properly.
• Check that the signal line connects securely with the monitor.
• Check that the pins in the interface are not curved.
Color shortage (red, green, or blue)
• Check cable connectors for curved or damaged pins. Replace cables if needed.
Image position is not centered/the size is not right
• Please adjust Clock or Auto setting.
Color difference (colors are not optimized)
• Adjust RGB color or reset color temperature.
Section 11: Cleaning
Take the following steps when cleaning the monitor. Do not press the monitor display
with hands or other objects; otherwise, there is a risk of damaging the screen.
1. Power off the monitor and PC.
2. Disconnect the power cord from the product.
Do not touch any cords or cables with wet hands. Electric shock may result.
3. Use a dry, non-abrasive cloth to gently remove dust and debris.
4. Lightly wet another soft cloth in water. Ring the cloth out well. Gently wipe the
exterior of the product.
Never use alcohol, solvent, surfactant or ammonia-based cleaning solutions. Do
not spray water or detergent directly on the product.
5. Connect the power cord to the product when cleaning is nished.
6. Power on the product and PC.

Viotek NFI29CB Specifications

General

Model Number	NFI29CB
LED Indicator	Power on: Blue (solid); Power saving: Blue (flashing)
Screen Size	29’’
Display Type	ADS
Viewing Angle	H178° / V178°
Aspect Ratio	21:9
Resolution	2560 x 1080p
Backlight	E-LED
Typical Brightness	300 cd/m² (max.)
Default Color Temp.	7500
Color Gamut	119%~123% sRGB; 85%~88% NTSC；90%~91% Adobe RGB
Contrast Ratio	1000:1 (Static)
Pixel pitch	0.2628 × 0.2628 (H x V)
Response Time	7ms (5ms OD)
Refresh Rate	75Hz (max.)
Ports	1x DP, 2x HDMI 1.4, 1x Audio Out (3.5mm)
Power	12V / 4A
Power Consumption	Max: 48W; Standby <=0.5W
OSD Language	English, 中文, 한국어, Deutsch, Español, Italiano, Français
Usage Temp.	32°F~95°F (operating), -4°F~140°F (storage), 10-90% RH (non-condensing)

Weight and Dimensions

Tilt Angle	Forward 5°; Backward 15°
VESA Mounting	75 x 75 mm
Dimension (with stand)	227.02 x 16.76 x 6.7 in (686.4 x 425.7 x 170.1mm)
Weight	8.16 Ib. / 11.68 Ib. (incl. packaging)