Viotek NFI29CB User Manual

9
Section 5: Mount Installation
1. Open the package and take out the product with foam still attached. Gently
place it on a desktop or table. Remove the extra parts and the foam covering the
monitor. If the monitor is already attached to the stand, remove the stand.
Button
2. Tighten four screws (not included) onto the mounting holes on back of monitor.
4x Screws (not included)
3. Install the monitor on the wall, mount, or xture as desired.
Mount
(not included)

Viotek NFI29CB Specifications

General

Model Number	NFI29CB
LED Indicator	Power on: Blue (solid); Power saving: Blue (flashing)
Screen Size	29’’
Display Type	ADS
Viewing Angle	H178° / V178°
Aspect Ratio	21:9
Resolution	2560 x 1080p
Backlight	E-LED
Typical Brightness	300 cd/m² (max.)
Default Color Temp.	7500
Color Gamut	119%~123% sRGB; 85%~88% NTSC；90%~91% Adobe RGB
Contrast Ratio	1000:1 (Static)
Pixel pitch	0.2628 × 0.2628 (H x V)
Response Time	7ms (5ms OD)
Refresh Rate	75Hz (max.)
Ports	1x DP, 2x HDMI 1.4, 1x Audio Out (3.5mm)
Power	12V / 4A
Power Consumption	Max: 48W; Standby <=0.5W
OSD Language	English, 中文, 한국어, Deutsch, Español, Italiano, Français
Usage Temp.	32°F~95°F (operating), -4°F~140°F (storage), 10-90% RH (non-condensing)

Weight and Dimensions

Tilt Angle	Forward 5°; Backward 15°
VESA Mounting	75 x 75 mm
Dimension (with stand)	227.02 x 16.76 x 6.7 in (686.4 x 425.7 x 170.1mm)
Weight	8.16 Ib. / 11.68 Ib. (incl. packaging)