Viotek NFI29CB User Manual

8
3. Remove the foam covering the back of the monitor. Locate the two top slots of the
opening on the back of monitor. Insert the mounting plate into the two top slots.
Continue to press in until it clicks into place to make sure the stand is installed in
place.
4. Place the monitor on your desktop or table after completing the installation and
carefully adjust monitor’s angle and/or orientation as desired.
Tilt adjust +5° / -15°
5. With the stand fully assembled, remove the remaining foam on monitor and stand
it up on a at, level desktop or table. Press the button to remove the monitor from
the bracket if mounting.
Button
Make sure the monitor is laid on a at surface before removing the stand.

Viotek NFI29CB Specifications

General

Model Number	NFI29CB
LED Indicator	Power on: Blue (solid); Power saving: Blue (flashing)
Screen Size	29’’
Display Type	ADS
Viewing Angle	H178° / V178°
Aspect Ratio	21:9
Resolution	2560 x 1080p
Backlight	E-LED
Typical Brightness	300 cd/m² (max.)
Default Color Temp.	7500
Color Gamut	119%~123% sRGB; 85%~88% NTSC；90%~91% Adobe RGB
Contrast Ratio	1000:1 (Static)
Pixel pitch	0.2628 × 0.2628 (H x V)
Response Time	7ms (5ms OD)
Refresh Rate	75Hz (max.)
Ports	1x DP, 2x HDMI 1.4, 1x Audio Out (3.5mm)
Power	12V / 4A
Power Consumption	Max: 48W; Standby <=0.5W
OSD Language	English, 中文, 한국어, Deutsch, Español, Italiano, Français
Usage Temp.	32°F~95°F (operating), -4°F~140°F (storage), 10-90% RH (non-condensing)

Weight and Dimensions

Tilt Angle	Forward 5°; Backward 15°
VESA Mounting	75 x 75 mm
Dimension (with stand)	227.02 x 16.76 x 6.7 in (686.4 x 425.7 x 170.1mm)
Weight	8.16 Ib. / 11.68 Ib. (incl. packaging)