Viotek NFI29CB User Manual

18
DECLARATION OF CONFORMITY
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC REL ATED INFORMATION:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modications to this equipment. Such modications could void the
user’s authority to operate the equipment.

Viotek NFI29CB Specifications

General

Model Number	NFI29CB
LED Indicator	Power on: Blue (solid); Power saving: Blue (flashing)
Screen Size	29’’
Display Type	ADS
Viewing Angle	H178° / V178°
Aspect Ratio	21:9
Resolution	2560 x 1080p
Backlight	E-LED
Typical Brightness	300 cd/m² (max.)
Default Color Temp.	7500
Color Gamut	119%~123% sRGB; 85%~88% NTSC；90%~91% Adobe RGB
Contrast Ratio	1000:1 (Static)
Pixel pitch	0.2628 × 0.2628 (H x V)
Response Time	7ms (5ms OD)
Refresh Rate	75Hz (max.)
Ports	1x DP, 2x HDMI 1.4, 1x Audio Out (3.5mm)
Power	12V / 4A
Power Consumption	Max: 48W; Standby <=0.5W
OSD Language	English, 中文, 한국어, Deutsch, Español, Italiano, Français
Usage Temp.	32°F~95°F (operating), -4°F~140°F (storage), 10-90% RH (non-condensing)

Weight and Dimensions

Tilt Angle	Forward 5°; Backward 15°
VESA Mounting	75 x 75 mm
Dimension (with stand)	227.02 x 16.76 x 6.7 in (686.4 x 425.7 x 170.1mm)
Weight	8.16 Ib. / 11.68 Ib. (incl. packaging)