49
The Electrics
Memory seat
The electronic seat adjustment was improved
in the following areas:
● The memory control unit now has a
nonvolatile memory which retains stored
seating positions while the battery terminals
are disconnected.
● It is no longer necessary to initialise the seat
after having disconnected a battery.
● The tone generator emits an
acknowledgement signal after the seating
position is stored.
The tone generator is no longer built into the
memory control unit, rather it is activated via
CAN databus in the dash panel insert.
Seat/mirror position control unit,
driver's side J394
251_086
251_043
251_039
Operator switches for seat adjustment and
Memory
To Next Page
Loading...
Need help?
General
