5
General information
About the workshop manual
This workshop manual contains technical specifi-
cation, descriptions and instructions for repairing
the standard versions of the following engines
AQ125A, B – AQ145A, B. The workshop manual
displays the operations carried out on any of the
engines above. As a result the illustrations and pic-
tures in the manual that show certain parts on the
engines, do not in some cases apply to all the en-
gines listed above. However the repair and service
operations described are the same in all essential
details. Where they are not the same this is stated
in the manual and where the difference is consider-
able the operations are described separately. En-
gine designations and numbers are given on the
number plate. The engine designation and number
should be given in all correspondence about the en-
gine.
This Workshop Manual has been developed primari-
ly for Volvo Penta service workshops and qualified
personnel. Persons using this book are assumed to
have a grounding in marine drive systems and be
able to carry out related mechanical and electrical
work.
Volvo Penta is continuously developing their prod-
ucts. We therefore reserve the right to make chang-
es. All the information contained in this book is
based on product data available at the time of going
to print. Any essential changes or modifications in-
troduced into production or updated or revised ser-
vice methods introduced after the date of publica-
tion will be provided in the form of Service Bulletins.
Replacement parts
Replacement parts for electrical and fuel systems
are subject to statutory requirements (US Coast
Guard Safety Regulations for example). Volvo Pen-
ta Genuine parts meet these requirements. Any
type of damage which results from the use of non-
original Volvo Penta replacement parts for the prod-
uct will not be covered under any warranty provided
by Volvo Penta.
To Next Page
Loading...
Need help?
General
