7.
Check that the towball section is secure by
pulling it up, down and back. If the towball
section is not fitted correctly then it must be
removed and refitted in accordance with
the previous steps.
3. Turn the locking wheel down fully, until it
comes to a stop. Hold it in this position while
pulling the towball rearward and upward.
8.
NOTE! The trailer’s safety cable must be
attached to the attachment on the towbar.
4. Insert the guard plug.2. Push in the locking wheel and turn it anti-
clockwise until you hear a click.
Removing the towball
1. Insert the key and turn it clockwise to the
unlocked position.
To Next Page
Loading...
