76
REMOTE ACCEss
A four-digit security code is required to access the
answering system remotely from any touch-tone
telephone. The preset code is 0000.
Note: Remote access can only be used if this function
is activated.
Dial your telephone number from any touch-tone
telephone.
When the answering system answers, press * and
then enter the four-digit remote access code.
Then you can enter one of the following remote
commands.
Command Description
1 Main menu.
2 Play all messages.
4 Repeat the current message or press
twice for the previous message.
5 Delete the message currently being
played.
6 Skip to the next message.
7 Turn on the answering machine.
9 Turn off the answering machine.
1.
2.
3.
To Next Page
Loading...
Need help?
General
