78
My telephone doesn’t work at all.
Make sure the power cord is securely plugged in.
Make sure you plug the battery connector securely
into the handset.
Make sure you plug the telephone line cord
Charge the battery in the handset for at least
16 hours. For optimum daily performance, return
the handset to the handset charger when not in use.
Make sure you turn the pendant on before use.
Reset the telephone base. Unplug the electrical
power. Remove the handset battery. Wait for
approximately 15 seconds, then plug the power
cord back in, and re-install the batteries. Allow up
to one minute for the handset and telephone base
to reset.
You may need to purchase a new handset battery.
I cannot get a dial tone.
Try all the suggestions above.
Move the handset closer to the telephone base. You
may have moved out of range.
If the previous suggestions do not work, disconnect
connect to a different phone. If there is no dial
tone on that phone either, the problem is in your
•
•
•
•
•
•
•
•
•
•
HELP
To Next Page
Loading...
Need help?
General
