38
LEDs on the line keys (L1-L4) indicate the status of calls:
LED light Indicates: Press key to:
O Line is idle Make a call
Fast ashing
green
Ringing incoming call Answer the call
Slow ashing
green
Call is on hold on your handset
OR another handset/deskset
Retrieve the held call
Steady green Call is active on your handset;
OR shared call is active on your
handset or another handset/
deskset
“Barge in” on the shared
call
Your phone system has its factory default with SIP Account 1 and its four line
keys (L1-L4) congured to provide a Key System experience. Ask your system
administrator for other modes of operation.
Transferring a call
You can transfer a call to another party.
If you talk to the transfer recipient before completing the transfer, you are making
a “supervised” transfer.
However, the transfer recipient does not have to talk to you before receiving the
transferred call. If you do not talk to the transfer recipient before transferring the
call, you are making a “blind” transfer.
You can also transfer a call to a held call. Note that you cannot transfer internal
calls.
To transfer a call (supervised):
1. During a call, press SELECT.
2. Press q to scroll to Transfer and press SELECT.
â
SELECT
3. With A call(annc.) highlighted, press SELECT.
The call is automatically put on hold.
4. Dial the number to which you want to transfer the call. Wait for the phone to
automatically dial, once it recognizes a valid number.
OR
Press q (Call History) or p (Directory) and call a number from a list.
To Next Page
Loading...
Need help?
General
