VTech VS 113-5 User Manual

48
49
Use the phone menu
1. Press MENU/SELECT when the phone
is not in use.
2. Press q CID or p until the screen
displays the desired feature menu.
3. Press MENU/SELECT to select and
enter the menu.
• To return to the previous menu, press
OFF/CANCEL on the handset or
CANCEL on the telephone base.
• To return to idle mode, press and
hold OFF/CANCEL on the handset or
CANCEL on the telephone base.
Phonebook
The phonebook stores up to 1,000
entries with up to 30 digits for each
phone number and 15 characters for
each name.
• Phonebook entries are stored at the
telephone base and shared by all
system handsets. Any changes made
on one handset apply to all.
• Only one handset can review the
phonebook at a time. If another
handset tries to enter the phonebook,
its screen shows Not available.
• When there are no records in the
phonebook, the screen shows List
empty.
• When you try to save a number
already stored in the phonebook, the
screen shows Number repeated.
• Phonebook entries can also be saved
to the allow list or block list. See Allow
list and Block list.
• When Smart call blocker is on,
calls with numbers saved in the
phonebook will get through and ring
on your telephone. If a number saved
in the phonebook is also saved in the
block list, calls from this number will
be blocked.
Add a phonebook entry
1. Press MENU/SELECT on the handset
or telephone base in idle mode.
2. Press q CID or p to highlight
Phonebook, then press
MENU/SELECT.
3. Press MENU/SELECT on the
handset again to choose Add
new entry, or press q CID or
p on the telephone base to
highlight Add new entry, then press
MENU/SELECT.
4. When the screen shows Enter
number, use the dialing keys to enter
a telephone number (up to 30 digits).
• Press q CID or p to move the
cursor to the left or right.
• Press VOICE/MUTE/DELETE on
the handset or X/DELETE on the
telephone base to erase a digit.
• Press and hold
VOICE/MUTE/DELETE on the
handset or X/DELETE on the
telephone base to erase all digits.
• Press and hold REDIAL/PAUSE
to insert a three-second dialing
pause (a P appears).
-OR-
Press REDIAL/PAUSE to copy a
number from the redial list. Press
q CID or p , or press
REDIAL/PAUSE repeatedly to
locate the desired number. Press
MENU/SELECT to copy the displayed
number.
5. Press MENU/SELECT to move on to
the name.
6. Use the dialing keys to enter a name
(up to 15 characters) when prompted.
Press a key repeatedly until the
desired
character shows on the screen.
• Press q CID or p to move the
cursor to the left or right.
• Press 0 to add a space.
• Press VOICE/MUTE/DELETE on
the handset or X/DELETE on
the telephone base to erase a
character.
• Press and hold
VOICE/MUTE/DELETE on the
handset or X/DELETE on the
telephone base to erase all
characters.
• Press TONE to change the next
letter to upper or lower case.
7. Press MENU/SELECT to store your
new directory entry.

VTech VS 113-5 Specifications

General

Brand	VTech
Model	VS 113-5
Category	Telephone
Language	English