VTech VS 113-5 User Manual

56
57
Access a number from the redial list
while on a call
1. Press REDIAL/PAUSE.
2. Press q CID, p , or
REDIAL/PAUSE until the desired
number displays.
3. Press MENU/SELECT to dial the
displayed number.
Caller ID
The telephone stores caller ID information
about the last 50 incoming calls in the
telephone base.
Memory match
If the incoming telephone number
matches the last 7 digits of a telephone
number in your phonebook, the name
that appears on the screen matches the
corresponding name in your phonebook.
For example, if Christine Smith calls, her
name appears as Chris if this is how you
entered it into your phonebook.
NOTE
• The number you see on your caller ID
is in the format sent by the telephone
service provider. It usually delivers
10-digit telephone numbers (area
code plus telephone number). If the
last 7 digits of the incoming telephone
number do not match a number in
your phonebook, the name appears
as it is delivered by the telephone
service provider.
Review the caller ID log
Review the caller ID log to find out who
called, to return the call, or to copy the
caller’s name and number into your
phonebook.
1. When the telephone is in idle mode,
press q CID to view the caller ID
log in reverse chronological order
starting with the most recent call.
-OR-
You can also review the caller ID
log by pressing MENU/SELECT in
idle mode, then press q CID or
p to scroll to Caller ID log. Press
MENU/SELECT twice to select
Review.
2. Press q CID or p to scroll through
the list. The handset or telephone
base beeps twice when you reach
the beginning or end of the caller ID
log.
3. Press OFF/CANCEL on the handset
or CANCEL on the telephone base to
exit the caller ID log.
NOTE
• Only one handset or the telephone
base can review the caller ID log at
time. If another handset tries to enter
the phonebook, caller ID log or call
block list, it shows Not available.
Save a caller ID log entry to the
phonebook
1. While reviewing the caller ID log,
press q CID or p on the handset
or telephone base to browse through
the caller ID log.
2. When the desired entry displays,
press MENU/SELECT.
3. Press MENU/SELECT again to choose
To Phonebook on the handset.
-OR-
Press MENU/SELECT again to choose
Phonebook on the telephone base.
4. When the screen shows Enter
number, use the dialing keys to
modify the telephone number (up
to 30 digits).
• Press q CID or p to move the
cursor to the left or right.
• Press VOICE/MUTE/DELETE on
the handset or X/DELETE on the
telephone base to erase a digit.
• Press and hold
VOICE/MUTE/DELETE on the
handset or X/DELETE on the
telephone base to erase all digits.
• Press and hold REDIAL/PAUSE
to insert a three-second dialing
pause (a P appears).
5. Press MENU/SELECT to save the
number in the display. The screen
shows Enter name.
6. Use the dialing keys to modify the
name (up to 15 characters).
• Press q CID or p to move the
cursor to the left or right.

VTech VS 113-5 Specifications

General

Brand	VTech
Model	VS 113-5
Category	Telephone
Language	English