80
81
• Press and hold
VOICE/MUTE/DELETE on the
handset or X/DELETE on the
telephone base to erase all digits.
• Press and hold REDIAL/PAUSE to
insert a three-second dialing pause
(a P appears).
-OR-
Press REDIAL/PAUSE to copy
a number from the redial list.
Press q CID or p , or press
REDIAL/PAUSE repeatedly to
locate the desired number. Press
MENU/SELECT to copy the displayed
number.
5. Press MENU/SELECT to move on to
the name.
6. When the screen displays Enter
name, use the dialing keys to enter a
name (up to 15 characters). Press a key
repeatedly until the desired
character shows on the screen. The first
character of every word is capitalized.
• Press q CID or p to move the
cursor to the left or right.
• Press 0 to add a space.
• Press VOICE/MUTE/DELETE on
the handset or X/DELETE on the
telephone base to erase a character.
• Press and hold
VOICE/MUTE/DELETE on the
handset or X/DELETE on the
telephone base to erase all
characters.
• Press TONE to change the next
letter to upper or lower case.
7. Press MENU/SELECT to store your
new block entry.
Review block list
1. Press CALL BLOCK on the handset or
telephone base to enter the call block
menu when the telephone is not in
use.
- OR -
Press MENU/SELECT to enter the
main menu when the handset is
not in use. Then, press q CID or
p to scroll to Smart call blk. Press
MENU/SELECT.
2. Press q CID or p to scroll to Block
list, then press MENU/SELECT.
3. Press MENU/SELECT to choose
Review.
4. Press q CID or p to browse
through the block entries.
Save a caller ID log entry to block list
1. Search for the desired caller ID log
entry (See Review the caller ID log).
2. When the desired entry appears,
press MENU/SELECT.
3. Press q CID or p to highlight To
Block list on the handset, or Block
list on the telephone base, and then
press MENU/SELECT. The screen
displays Enter number.
4. Use the dialing keys to edit the
number, if necessary.
• Press q CID or p to move the
cursor to the left or right.
• Press VOICE/MUTE/DELETE on
the handset or X/DELETE on the
telephone base to erase a digit.
• Press and hold
VOICE/MUTE/DELETE on the
handset or X/DELETE on the
telephone base to erase all digits.
• Press and hold REDIAL/PAUSE
to insert a three-second dialing
pause (a P appears).
5. Press MENU/SELECT. The handset
displays Enter name.
6. Use the dialing keys to edit the name.
• Press q CID or p to move the
cursor to the left or right.
• Press 0 to add a space.
• Press VOICE/MUTE/DELETE on
the handset or X/DELETE on
the telephone base to erase a
character.
• Press and hold
VOICE/MUTE/DELETE on the
handset or X/DELETE on the
telephone base to erase all
characters.
• Press TONE to change the next
letter to upper or lower case.
7. Press MENU/SELECT to confirm. You
hear a confirmation tone.
Edit a block list entry
1. Search for the desired entry in the
block list (see Review block list).
2. When the desired entry displays,
press MENU/SELECT. The screen
displays Enter number along with
the phone number to be edited. If
you only want to edit the name, skip
to Step 4.
3. To edit the number:
• Use the dialing keys to enter digits.
• Press q CID or p to move the
cursor to the left or right.
• Press VOICE/MUTE/DELETE on
the handset or X/DELETE on the
telephone base to erase a digit.
• Press and hold
VOICE/MUTE/DELETE on the
handset or X/DELETE on the
telephone base to erase all digits.
• Press and hold REDIAL/PAUSE
to insert a three-second dialing
pause (a P appears).
4. Press MENU/SELECT to move on to
the name. The screen shows Enter
name along with the name to be
edited.
To Next Page
Loading...
Need help?
General
