Directory
If there are no stored entries,
LIST
EMPTY
will be displayed.
If you try to store a new entry and the
directory is full, you will hear an error
tone and
FULL
will be displayed.
If the number you store has more than
11 digits, the display shows to the
left of the number to indicate more
digits ahead.
Writing tips
If you make a mistake, press
Right soft key
C
to delete the last
character or digit.
Press repeatedly to enter the
following: SPACE – 1
Press * repeatedly to enter the
following symbols: * ? / \ ( )
Press repeatedly to enter the
following symbols: # ' , - . &
If the next letter is on the same button
that you have just pressed, wait until
the cursor moves to the right before
trying to enter it.
You can store up to 20 names and numbers in the directory of
each of your VT1030 handsets for quick and easy
dialling. Numbers can be up to 20 digits long. Directory
entries are stored alphabetically.
Store a number
1. Press to open the directory. The first entry is displayed.
2. Press Left soft key ,
ADD
is displayed, press
OK
to select.
3.
NAME
is displayed, enter the name for the entry using the
keypad and press
OK
to store.
4.
NUMBER
is displayed, enter the number for the entry using the
keypad and press
OK
to save.
5. Press or to select a ringtone to associate with the
name/number and press Left soft key
OK
to confirm.
6. Press Right soft key
to return to standby.
Entering names
Use the keypad to enter the letters shown on the buttons,
e.g. to store DAN:
1. Press once to enter D.
2. Press once to enter A.
3. Press twice to enter N.
21
To Next Page
Loading...
Need help?
General
