Insert a pause in a number
You may need to do this if you are
connected to a switchboard. When
entering a number, usually after
entering the switchboard access code
(e.g. 9) press and hold until
P
appears in the display.
Dial/view a number
1. Press to open the directory. The first entry is displayed.
2. Press or to scroll through the directory to the entry
you want.
Or, search alphabetically, using the keypad to enter the first
letter of the name you want, then scroll to the exact entry
using the or buttons.
3. Press Left soft key , then to display
VIEW
and press
OK
to confirm.
4. The selected entry will be displayed ready to be dialled out.
Press or to dial.
Edit a directory entry
1. Press to open the directory. The first entry is displayed.
2. Press or to scroll through the directory to the entry
you want.
3. Press Left soft key , then to display
EDIT
and press
OK
to select.
4. The stored name is displayed followed by a flashing cursor. Edit
the name using the Right soft key
C
to delete incorrect
characters and enter new ones using the keypad, then press
OK
.
Directory
Searching for a name
Example: To search for Jaime, press
once to display the first entry
beginning with J, then use and
to scroll to Jaime.
22
To Next Page
Loading...
Need help?
General
