Wacker Neuson 8003 User Manual

1-20 OM 75Z3/8003 US – Edition 4.0 * * 7003b110.fm
Introduction
Description (option)
The tank contains biodegradable hydraulic oil.
This label is notched on the side depending on the biodegradable hydraulic oil used.
1 BP Biohyd SE-S 46
2 PANOLIN HLP Synth 46
3 Other producer of biodegradable hydraulic oil
– see chapter Important information for the use of biodegradable oil on page 5-31
Description
States the pressures that can be measured.
Location
In the engine compartment on the left.
Description (serial nos. AH01659 to AH02749)
This label describes the pedal and control lever functions (control pattern A).This label
describes the pedal and control lever functions.
– see chapter 3.49 Control levers/control pattern ’’A’’: Overview on page 3-75
Location
On the headliner.
Description (from serial no. AJ03264)
This label describes the pedal and control lever functions (control pattern A).This label
describes the pedal and control lever functions.
– see chapter 3.49 Control levers/control pattern ’’A’’: Overview on page 3-75
Location
On the headliner.
Description (option)
Explains the joystick functions (control pattern B).
Check before starting the machine the control pattern that has been chosen.
– see chapter 3.50 Changeover valve for control pattern ’’B’’ (option) on page 3-79
Location
On the headliner.
Controls
A = ISO controls
B = SAE controls
BIO
1000252423
BIO
HYDRAULIC OIL
HYDRAULIC OIL
BP Biohyd SE-S 46 | 1000097823
Panolin HLP Synth 46 | 1000097826
Fig. 35: Biodegradable hydraulic oil
1
2
3
Fig. 36: Measurement ports
Fig. 37: ISO controls
Fig. 38: ISO controls
Fig. 39: SAE controls

Wacker Neuson 8003 Specifications

General

Brand	Wacker Neuson
Model	8003
Category	Excavators
Language	English