1-24 OM 75Z3/8003 US – Edition 4.0 * * 7003b110.fm
Introduction
Always follow the instructions given on the safety labels to avoid severe inju-
ries or death.
Description
The label means the following:
• Danger due to grease squirting out.
• Always read the Operator’s Manual before working on the tracks.
Location
On left and right-hand side of undercarriage near the lubrication system.
Description
Entanglement hazard.
Stop the engine before opening or dismounting the safety devices (like engine cover, fan
guard, etc.)
Location
On the chassis below the engine cover handle.
Description
Cutting hazard. Cooling fan can cut when rotating.
• Stop the engine before opening the engine cover.
• Stay clear of the engine compartment if the fan is still running.
Entanglement hazard. You can be pinched or entangled in the engine V-belt when the
engine is running.
• Stay clear of the engine compartment with the engine running.
• Perform work in the engine compartment at engine standstill only.
Burn hazard. Hot surface. Do not touch. Contents are under pressure.
• Allow the tank to cool down.
• Carefully and slowly open the cover only after the tank has cooled down, to release the
pressure.
• Wear suitable protective clothing and goggles to open the cover.
Location
In the engine compartment on the right.
Description
Burn hazard. Hot surface. Do not touch.
• Wait for parts to cool down.
Location
In the engine compartment on the left.
Fig. 49: Prohibitory label
To Next Page
Loading...
Need help?
General
